INFLUENCE OF GRAPHENE ADDITION IN EPOXY RESIN APPLIED TO CARBON FIBER STRUCTURAL REINFORCEMENT OF CONCRETE BEAMS
DOI:
https://doi.org/10.36557/2674-9432.2026v5n2p5-24Keywords:
Adhesive, CFPR, Polymer matrix, Nanocomposites, ToughnessAbstract
Structural reinforcement plays a key role in preserving and adapting structures that are nearing the end of their useful life, that were built according to obsolete standards, or that need to be adapted for new uses beyond their original capacities. The use of carbon fiber reinforced polymers (CFRP) stands out for this function, as it has good mechanical and corrosion resistance, low density, and minimal alteration in the geometry of the reinforced element. However, premature detachment of CFRP, resulting from adhesive characteristics such as brittle fracture mode and low fracture toughness, can compromise the structural stability of the system. In connection with this, recent research has focused on improving polymer matrices by incorporating nanomaterials, such as graphene, which provides greater toughness and mechanical strength to the composite when properly dispersed. Based on this, the objective of this study was to evaluate the influence of adding graphene to epoxy resin applied to carbon fiber structural reinforcements in concrete beams. The composite was produced by incorporating graphene into the epoxy resin, using a torque rheometer for dispersion; its functional groups, thermal, and mechanical properties were analyzed by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG/DTA), and tensile test. The beams were subjected to a four-point bending test, in which data were obtained on the stress at the appearance of the first crack, breaking stress, and evaluation of the failure mode of the samples. The experimental data showed that the compositions with graphene had a greater deformation capacity before failure. However, the cracking and rupture stresses of the beams reinforced with the epoxy/graphene composite and with the pure resin were statistically equal. As this result is linked to the failure mode, there remains the possibility that graphene contributes to improving structural reinforcement, especially in increasing toughness - the ability to absorb energy before rupture.
Downloads
References
ABDI, E. et al. The effect of graphene and graphene oxide on defective single lap adhesively bonded joints. Journal of Composite Materials, v. 56, n. 17, p. 2665-2675, July 1, 2022.
ABNT - ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNCIAS. NBR 5738: Concrete – Procedure for modeling and curing test specimens. Rio de Janeiro, 2015.
ABNT - ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNCIAS. NBR 5739: Concrete – Compression testing of cylindrical test specimens. Rio de Janeiro, 2018.
ABNT - ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNCIAS. NBR 6118: Design of concrete structures. Rio de Janeiro, 2023.
ABNT - ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNCIAS. NBR 12142: Concrete – Determination of flexural strength of prismatic specimens. Rio de Janeiro, 2010.
ACI (AMERICAN CONCRETE INSTITUTE). ACI 440-2R-08 - State-of-the-art report on fiber reinforcing plastic reinforcement for concrete structures.
ASTM (American Society for Testing and Materials). ASTM C78/78M. Test method for flexural strength of concrete (using simple beam with third-point loading). ASTM International, West Conshohocken, PA, 2022, www.astm.org.
BALAGURU, P.; NANNI, A.; GIANCASPRO, J. FRP composites for reinforced and prestressed concrete structures: a guide to fundamentals and design for repair and retrofit. Taylor & Francis, 2008.
BARBOSA, L. C. DE A. Infrared spectroscopy in the characterization of organic compounds. UFV, 2007.
BIANCHI, O. et al. Rheology, curing and time-dependent behavior of epoxy/carbon nanoparticle systems. Journal of Applied Polymer Science, v. 141, n. 3, Jan. 15, 2024.
CHEN, L. et al. A general way to manipulate electrical conductivity of graphene. Chemical Engineering Journal, v. 462, April 15, 2023.
DA LUZ, F. S. et al. Graphene-incorporated natural fiber polymer composites: A first overview. PolymersMDPI AG, July 1, 2020.
DE CICCO, D.; ASAEE, Z.; TAHERI, F. Use of nanoparticles for enhancing the interlaminar properties of fiber-reinforced composites and adhesively bonded joints— a review. Nanomaterials, v. 7, n. 11, p. 360, 2017.
FLOREK, P. et al. Carbon fiber reinforced polymer composites doped with graphene oxide in light of spectroscopic studies. Materials, v. 14, n. 8, April 2, 2021.
GUEST, J.; KINLOCH, I. A.; YOUNG, R. J. The role of filler aspect ratio in the reinforcement of an epoxy resin with graphene nanoplatelets. Journal of Materials Science, v. 58, n. 23, p. 9473–9485, June 1, 2023.
HEIZA, K. et al. State-of-the-art review: strengthening of reinforced concrete structures - different strengthening techniques. Sixth International Conference in Nano-Technology in Construction, 2014.
HSIEH, T. H. et al. The effect of carbon nanotubes on the fracture toughness and fatigue performance of a thermosetting epoxy polym. Journal of Materials Science, v. 46, n. 23, p. 7525–7535, Dec. 2011.
HUANG, N. J. et al. Efficient interfacial interaction for improving mechanical properties of polydimethylsiloxane nanocomposites filled with low content of graphene oxide nanoribbons. RSC Advances, v. 7, n. 36, p. 22045–22053, 2017.
IRSHIDAT, M. R.; AL-SALEH, M. H.; AL-SHOUBAKI, M. Using carbon nanotubes to improve strengthening efficiency of carbon fiber/epoxy composites confined RC columns. Composite Structures, v. 134, p. 523–532, Dec. 15, 2015.
IRSHIDAT, M. R.; AL-SALEH, M. H. Effect of using carbon nanotube modified epoxy on bond-slip behavior between concrete and FRP sheets. Construction and Building Materials, v. 105, p. 511–518, Feb. 15, 2016.
IRSHIDAT, M. R.; AL-SALEH, M. H.; ALMASHAGBEH, H. Effect of carbon nanotubes on strengthening of RC beams retrofitted with carbon fiber/epoxy composites. Materials and Design, v. 89, p. 225–234, Jan. 5, 2016.
IRSHIDAT, M. R.; AL-SALEH, M. H. Flexural strength recovery of heat-damaged RC beams using carbon nanotubes modified CFRP. Construction and Building Materials, v. 145, p. 474–482, Aug. 1, 2017.
IRSHIDAT, M. R.; AL-HUSBAN, R. S. Effect of bond enhancement using carbon nanotubes on flexural behavior of RC beams strengthened with externally bonded CFRP sheets. Frontiers of Structural and Civil Engineering, v. 16, n. 1, p. 131–143, Jan. 1, 2022.
KINLOCH, A. J.; YOUNG, R. J. Fracture behavior of polymers. Dordrecht: Springer Netherlands, 1995.
LAVORATTI, A.; ZATTERA, A. J.; AMICO, S. C. Mechanical and dynamic-mechanical properties of silane-treated graphite nanoplatelet/epoxy composites. Journal of Applied Polymer Science, v. 135, n. 45, Dec. 5, 2018.
PANIGRAHI, A. K. Strengthening of shear deficient RC T-beams with externally bonded FRP sheets. ODISHA: NATIONAL INSTITUTE OF TECHNOLOGY, ROURKELA, Jan. 2013.
RAFIEE, M. A. et al. Enhanced mechanical properties of nanocomposites at low graphene content. ACS Nano, v. 3, n. 12, p. 3884–3890, Dec. 22, 2009.
RAFIEE, M. et al. Significant fatigue life enhancement in multiscale doubly- modified fiber/epoxy nanocomposites with graphene nanoplatelets and reduced- graphene oxide. Polymers, v. 12, n. 9, 2020.
REALE BATISTA, M. D.; DRZAL, L. T. Carbon fiber/epoxy matrix composite interphases modified with cellulose nanocrystals. Composites Science and Technology, v. 164, p. 274–281, Aug. 18, 2018.
REIS, L. S. N. On the recovery and reinforcement of reinforced concrete structures. Belo Horizonte: Federal University of Minas Gerais, Apr. 12, 2001.
RIBEIRO, H. Synthesis and characterization of nanostructured composites based on chemically modified graphene nanosheets. Preparation, study of structure and physicochemical properties. Belo Horizonte: Federal University of Minas Gerais - Institute of Exact Sciences, 2015.
SCHUSTER, M. B. Fracture toughness in epoxy matrix nanocomposites with carbon nanoparticles. Joinville: State University of Santa Catarina, Dec. 4, 2017.
SHARMA, H. et al. An overview on carbon fiber-reinforced epoxy composites: Effect of graphene oxide incorporation on composites Performance. PolymersMDPI, 2022.
SHESHMANI, S.; ASHORI, A.; ARAB FASHAPOYEH, M. Wood plastic composite using graphene nanoplatelets. International Journal of Biological Macromolecules, v. 58, p. 1–6, 2013.
SILVA, D. D. DA; SANTOS, W. F. DOS; PEZZIN, S. H. Epoxy matrix nanocomposites with reinforcements produced from natural graphite. Matéria (Rio de Janeiro), v. 18, n. 2, p. 1216–1272, 2013.
SILVA, E. M. DE A. et al. Methods for restoration and reinforcement of reinforced concrete structures. Revista Ibero-Americana de Humanidades, Ciências e Educação, v. 8, n. 11, p. 2255–2286, Nov. 30, 2022.
TRUONG, G. T.; VAN TRAN, H.; CHOI, K. K. Investigation on mode i fracture toughness of woven carbon fiber-reinforced polymer composites incorporating nanomaterials. Polymers, v. 12, n. 11, p. 1–23, Nov. 1, 2020.
WAZALWAR, R.; TRIPATHI, N.; RAICHUR, A. M. Mechanical and curing behavior of epoxy composites reinforced with polystyrene-graphene oxide (PS-GO) core-shell particles. Composites Part C: Open Access, v. 5, July 1, 2021.
WANG, H. W. et al. Analysis of effect of fiber orientation on Young’s modulus for unidirectional fiber reinforced composites. Composites Part B: Engineering, v. 56, p. 733–739, 2014.
WANG, H. et al. Resistance of graphene/epoxy resin—based composite materials to γ radiation damage and their mechanical properties. Coatings, v. 13, n. 9, Sept. 1, 2023. WANG, H.
WIERZBICKI, L. R. Analysis of the performance of the NSM (Near Surface Mounted) reinforcement technique with carbon fibers in beams subjected to bending. Curitiba: Federal Technological University of Paraná, 2021.
WU, Q. et al. Constructing a simple anti-sandwich structure on carbon fiber surface for simultaneously strengthening and toughening the interphase of epoxy composites. Composite Structures, v. 240, May 15, 2020.
XIONG, S. et al. Enhanced interfacial properties of carbon fiber/epoxy composites by coating carbon nanotubes onto carbon fiber surface by one-step dipping method. Applied Surface Science, v. 546, April 30, 2021.
YAN, H. et al. Self-assembly of carbon nanomaterials onto carbon fiber to improve the interfacial properties of epoxy composites. Journal of Materials Science and Technology, v. 161, p. 44–49, Oct. 20, 2023.
YUSTE-SÁNCHEZ, V. et al. In-situ cure monitoring of epoxy/graphene nanocomposites by several spectroscopic techniques. Polymer Testing, v. 80, Dec. 1, 2019.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Taila Brandes Abrahão, Virgínia Turatti Coladetti, Arthur Medeiros, Juliana Regina Kloss, Wellington Mazer
This work is licensed under a Creative Commons Attribution 4.0 International License.
Você tem o direito de:
- Compartilhar — copiar e redistribuir o material em qualquer suporte ou formato para qualquer fim, mesmo que comercial.
- Adaptar — remixar, transformar, e criar a partir do material para qualquer fim, mesmo que comercial.
- O licenciante não pode revogar estes direitos desde que você respeite os termos da licença.
De acordo com os termos seguintes:
- Atribuição — Você deve dar o crédito apropriado , prover um link para a licença e indicar se mudanças foram feitas . Você deve fazê-lo em qualquer circunstância razoável, mas de nenhuma maneira que sugira que o licenciante apoia você ou o seu uso.
- Sem restrições adicionais — Você não pode aplicar termos jurídicos ou medidas de caráter tecnológico que restrinjam legalmente outros de fazerem algo que a licença permita.
